20 mEq of potassium chloride in mg
20 mEq of potassium chloride is 1,491 mg (1.49 g) of KCl, carrying 782 mg of elemental potassium. Worked steps, a dose table, and the oral and IV forms.
Quick answer
20 mEq of KCl is 1,491 mg (1.49 g) of potassium chloride, which contains about 782 mg of elemental potassium. Multiply 20 by 74.55 mg per mEq for the salt, or by 39.1 mg per mEq for the potassium alone. Tablet labels round the salt to 1,500 mg; IV bag labels print 1.49 g.
How to convert 20 mEq of KCl to mg
Multiply 20 by the mass of 1 mEq of potassium chloride, 74.55 mg.
- Potassium chloride weighs 74.55 g/mol.
- Potassium carries a charge of 1, so 1 mEq is 1 mmol, which is 74.55 mg of KCl.
- 20 mEq × 74.55 mg = 1,491 mg of potassium chloride (1.49 g).
- Potassium alone weighs 39.1 mg per mEq, so the dose contains 20 × 39.1 = 782 mg of elemental potassium.
1,491 mg or 782 mg: which answer do you need?
Use 1,491 mg when you mean the drug, and 782 mg when you mean the potassium in it. Prescriptions, tablets and IV bags are labeled with the salt. Food and supplement labels list potassium itself in mg, and the FDA's Daily Value for potassium is 4,700 mg, so a 20 mEq dose carries about a sixth of the Daily Value. Comparing a 20 mEq prescription with a supplement label means comparing 782 mg with the supplement's mg of potassium, not 1,491 mg.
Why do tablet labels say 1,500 mg?
Because the labels round. The Klor-Con M20 label describes "1,500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium". The exact conversion is 1,500 ÷ 74.55 = 20.12 mEq. The IV bag rounds the other way: the Baxter 20 mEq/100 mL bag contains 14.9 g per liter, which is 1.49 g per bag. Both are 20 mEq. Dose from the mEq on the label, never from your own mg conversion.
What does 20 mEq of potassium chloride look like?
| Form | How 20 mEq is supplied | Potassium chloride |
|---|---|---|
| Extended-release tablet | One 20 mEq tablet, or two 10 mEq tablets | 1,500 mg (or 2 × 750 mg) |
| Powder for oral solution | One packet | 1.5 g |
| 10% oral solution (1.3 mEq/mL) | 15 mL | 1.5 g |
| Premixed IV bag | 20 mEq in 100 mL, or 20 mEq in 50 mL (central line only per label) | 1.49 g |
| IV concentrate (2 mEq/mL) | 10 mL, for dilution only | 1.49 g |
Oral vs IV: how is 20 mEq given?
By mouth. The Klor-Con M label gives 20 mEq per day as the typical dose for preventing low potassium, with 40 to 100 mEq per day or more used to treat depletion. Labels disagree on the largest single dose: the Klor-Con M tablet label says no more than 20 mEq at once, while the oral solution and powder labels limit doses to 40 mEq. The oral solution label says to dilute it in at least 4 ounces of cold water, and the powder label says to dissolve one packet in 4 ounces of cold water or another beverage. The oral solution and powder labels also say to use IV potassium instead when serum potassium is below 2.5 mEq/L.
IV. The Baxter premixed bag label says rates should not usually exceed 10 mEq per hour when serum potassium is above 2.5 mEq/L, which means 20 mEq takes at least 2 hours. A 20 mEq/100 mL bag over 2 hours runs at 50 mL/hr; the IV pump rate calculator does this from the "dose per hour" option. The 20 mEq/50 mL bag is 400 mEq/L, and the label says that concentration goes exclusively through a central line. Per its label, the 2 mEq/mL concentrate must be diluted before administration, and direct injection may be instantaneously fatal. The premixed bag label says to give it only with a calibrated infusion device. Your facility protocol sets the limits you actually work to.
Nearby potassium chloride doses
| KCl (mEq) | KCl (mg) | Elemental potassium (mg) |
|---|---|---|
| 10 | 745.5 | 391 |
| 15 | 1,118.3 | 586.5 |
| 20 | 1,491 | 782 |
| 25 | 1,863.8 | 977.5 |
| 30 | 2,236.5 | 1,172.9 |
| 40 | 2,982 | 1,563.9 |
The full table from 2 to 100 mEq, plus sodium, magnesium and calcium salts, is on the mEq to mg converter. Double the dose and the numbers are on 40 mEq of KCl in mg.
For why the rate limits exist and what hyperkalemia looks like on the monitor, see potassium on the NCLEX and high-alert medications.
Quick check
Loading a question…
Frequently asked questions
How many mg is 20 mEq of potassium?
As potassium chloride, 20 mEq is 1,491 mg, which labels round to 1,500 mg. The potassium itself in that dose weighs 782 mg.
Is 20 mEq the same as 20 mg?
No. mEq counts charge and mg counts mass. 20 mEq of KCl weighs 1,491 mg, about 75 times more than 20 mg.
How many grams is 20 mEq of KCl?
1.49 g. Oral labels round it to 1.5 g, and the premixed IV bag label prints 1.49 g.
How long does 20 mEq of IV potassium take to run?
At the premixed bag label's usual maximum of 10 mEq per hour (serum potassium above 2.5 mEq/L), at least 2 hours. A 20 mEq/100 mL bag over 2 hours runs at 50 mL/hr. Your facility protocol may set a slower rate.
Sources
- Potassium Chloride | ClK | CID 4873 - PubChem. National Library of Medicine (NIH). Accessed November 11, 2026.
- DailyMed - KLOR-CON M- potassium chloride tablet, extended release. Upsher-Smith Laboratories, FDA label via DailyMed. Accessed November 11, 2026.
- DailyMed - KLOR-CON- potassium chloride powder, for solution. Upsher-Smith Laboratories, FDA label via DailyMed. Accessed November 11, 2026.
- DailyMed - POTASSIUM CHLORIDE solution. Amneal Pharmaceuticals, FDA label via DailyMed. Accessed November 11, 2026.
- DailyMed - POTASSIUM CHLORIDE injection, solution. Baxter Healthcare, FDA label via DailyMed. Accessed November 11, 2026.
- DailyMed - POTASSIUM CHLORIDE injection, solution, concentrate. Hospira, FDA label via DailyMed. Accessed November 11, 2026.
- Daily Value on the Nutrition and Supplement Facts Labels. U.S. Food and Drug Administration. Accessed November 11, 2026.
Make the math automatic
Nursing Ready drills dosage calculation, IV math and the priority calls around them in NCLEX format, with a full rationale on every question.
7-day free trial on monthly plans and up. Cancel anytime.